Spool Piece Ultrasonic Flowmeter FST1D111-YDAY FUJI giá ưu đãi.

FST1D111-YDAY

Liên hệ 1900.6536
MÃ HÀNG: FST1D111-YDAY
Tài liệu đang được cập nhật!
LƯỢT XEM: 456
DỊCH VỤ & KHUYẾN MẠI
  • Quà tặng trị giá 200.000đ (Áp dụng sản phẩm tự động hóa công nghiệp SCHNEIDER ELECTRIC)
  • Nhập mã HOPLONG giảm thêm 1% dành cho toàn bộ đơn hàng từ 01/01 đến 20/04/2020
  • Tặng voucher 20.000đ khi đánh giá 5*(Áp dụng cho đơn hàng từ 200.000đ)
  • Đăng nhập để nhận giá tốt nhất
Mã hàng Giá thường Giá bán Tình trạng Số lượng Đặt hàng
Image Image

{{ itemPartNumber['title'] }}

{{ itemPartNumber["short_description"] }}
{{ itemPartNumber['list_price']|number }}VNĐ Liên hệ: 1900.6536 {{ itemPartNumber['price'] }}

Có sẵn: {{ itemPartNumber['in_stock'] > 0 ? itemPartNumber['in_stock'] : 0 }}

Đặt hàng: Từ 2-4 tuần

Thêm giỏ
Mua ngay
Liên hệ

Thông số kỹ thuật

Spool Piece Ultrasonic Flowmeter FST se ri FST1D111-YDAY FUJI


- Nguyên tắc đo lường: Transit time difference method. Parallel 3-path Có the advanced ABM (anti-bubble measurement) system
- Đường kính ống (mm): 50
- Phạm vi vận tốc dòng chảy: Tối thiểu 0 đến 0,3 m/s hoặc -0,3 đến 0 m/s. Tối đa 0 đến 10 m/s hoặc -10 đến 0 m/s
- Phạm vi lưu lượng: Tối thiểu 0 đến 2,11 m3/h, tối đa 0 đến 70,6 m3/h
- Nguồn cấp: 100–240 V AC (+10% -15%), 50/60 Hz
- Năng lượng tiêu thụ: Xấp xỉ 20 VA
- Nối đất: D-class grounding Có ground resistance of 100Ω or less
- Bộ hãm: Provided as standard, on power supply port and analog output port
- Vỏ hộp máy: IP66
- Môi trường hoạt động: -40°C đến + 60°C, RH 90% trở xuống
- Chất lỏng: Chất lỏng (chất lỏng đồng nhất qua đó sóng siêu âm có thể lan truyền)
- Applicable fluid: Liquid (uniform liquid through which ultrasonic wave can propagate)
- Bubble content of Fluid condition: ≤ 12 vol%
- Turbidity of Fluid conditions: 10.000 mg / L trở xuống
- Flow profle of Fluid condition: fully-developed turbulent or laminar flow in a fully-flled pipe
- Nhiệt độ chất lỏng: -40°C đến +150°C
- Pressure of fluid conditions: Up to flange rating
- Kinematic viscosity for fluid conditions: ≤ 100 mm2/s
- Các bộ phận bị ướt của máy dò: Flow cell: stainless steel 316L. Flange: stainless steel 316L. Sensor wetted parts: stainless steel 316L
- Detector material: Housing: SCS13
- Quá trình kết nối của máy dò: Flange (horizontal or vertical mounting)
- Flange rating of detector: JIS10K/JIS20K, ANSI class 150/300, DIN PN16/40
- Accuracy (reading and pulse output) of performance: ±0.2% of rate (flow velocity: 1 m/s to 10 m/s), ±0.002 m/s (flow velocity: 0.5 m/s to 1 m/s). 4–20 mA DC output: Above indicated accuracy ±0.01 mA (at the ambient temperature of 25°C)
- Thời gian đáp ứng hiệu suất: 1,2 s (tiêu chuẩn)
- Tín hiệu đầu ra analog của máy phát lưu lượng: 4-20 mA DC (cách điện), 1 điểm, khả năng chịu tải cho phép: 600Ω hoặc ít hơn
- Tiếp điểm đầu ra của máy phát lưu lượng: Forward total, reverse total, alarm, acting range, flow switch, or total switch. Sử dụngr confgurable Type: transistor output (isolated, open collector). Contact capacity: 30 V DC, 50 mA. 2 points. Normal: ON or OFF, selectable. Frequency: 100 P/s max( Pulse width: 5, 10, 50, 100, 200, 500, 1000 ms)
- Cài đặt tham số/tag plate: -
- Truyền dữ liệu (option) of Máy phát dòng: RS-485 (MODBUS), isolated, arrestor incorporated. No. of connectable modules: up to 31. Baud rate: 9600, 19200, 38400 bps. Parity: none/odd/even, selectable. Stop bit: 1 or 2 bit, selectable. Cable length: up to 1 km. Data: Flow velocity, flow rate, forward total, reverse total, status, etc
- Mounting/wiring port position: Horizontal/on downstream side
- Màn hình hiển thị của máy phát lưu lượng: 16-digit 2-line backlit LCD. 2-color LED (green: normal, red: at error)
- Ngôn ngữ của máy phát lưu lượng: Tiếng Nhật (katakana), tiếng Anh, tiếng Pháp, tiếng Đức, tiếng Tây Ban Nha (có thể chuyển đổi)
- Flow velocity/flow rate indication of Máy phát dòng: 8 digits numerals (decimal point is counted as 1 digit). Instantaneous flow rate, instantaneous flow velocity( minus indication for reverse flow)
- Total value indication of Máy phát dòng: Integrated value of forward flow or reverse flow (reverse flow is indicated Có minus symbol) 8 digits numerals (decimal point is counted as 1 digit). Unit: mL, L, m3, km3, Mm3
- Housing material of Máy phát dòng: Hợp kim nhôm
- Coating of Máy phát dòng: Urethane resin
- Finish color of Máy phát dòng: Bạc
- Wiring port of Máy phát dòng: G1/2 internal thread. Plastic water-proof gland + rubber plug
- Terminal of Máy phát dòng: Thanh thiết bị đầu cuối
- Cài đặt: Bằng cách sử dụng 4 phím
- Điều chỉnh điểm 0: By setting zero or clearing zero
- Giảm xóc: For analog output or velocity/flow rate indication, 0 to 100 seconds (In 1-second steps)
- Low flow cut-off: 0 to 5 m/s in terms of flow velocity
- Báo hiệu: For hardware error or process error. Contact output available
- Giới hạn đầu ra: Giới hạn cao / thấp cho đầu ra analog có sẵn trong phạm vi từ 0,8 mA đến 23,2 mA
- Độ trễ: 0% đến 20% phạm vi hoạt động. Phạm vi làm việc áp dụng cho đầu ra kỹ thuật số.
- Spool Piece Ultrasonic Flowmeter FST se ri FST1D111-YDAY FUJI được Hợp Long phân phối giá tốt nhất.

Tổng quan

Kích thước

DOCUMENT & DOWNLOAD

Tài liệu đang được cập nhật!

Ảnh thực tế

Đánh giá

Đánh giá FST1D111-YDAY

0.0
0
0
0
0
0

Gửi đánh giá của bạn

Rating Bad           Good

Hỏi đáp

THẢO LUẬN VỀ: FST1D111-YDAY
0 Bình Luận Xem Bình Luận Kỹ Thuật
  • {{commentItem['name'] }}
    {{commentItem['comment'] }}
    Trả lời ({{commentItem['quantity_reply'] }}) Trả lời - {{commentItem['created_at'] }}